Two-Component Epoxy Water Paint Liquid Coatings for Automobile Shock Absorber

• CAS No.: /
• Formula: /
• EINECS: /
• Color: Orange Grey
• Appearance: Liquid
• Main Raw Material: Epoxy
• Model NO.: AE-29003A
• Paint Film Property: Anti-Corrosion Coating
• Method: Spray
• Level: Finish Coat
• Category: Two-Component Paint
• Certification: ISO9001, ISO14001, RoHS
• Substrate: Steel
• Components: Epoxy
• Formation Mechanism: Conversion Type
• Transport Package: Barrel
• Trademark: KINTE
• Origin: China
• HS Code: 390730
• Production Capacity: 200 Tons Per Month

Product Description

Waterborne Two-component Epoxy Resins Paints for Automobile Steering Column Anti-corrosion


Introduction
AE-29003A is composed of water-based modified epoxy resin, polyamine curing agent, deionized water, water-based additives, co-solvents, environmental protection pigments, fillers, etc. 
It is widely used in the coating of the surface of metal substrates used in transmission shafts, shock absorbers, steering columns and other products. It plays a very good role in decoration and anti-corrosion protection. It is suitable for manual spraying and DISC electrostatic spraying.
Waterborne epoxy coatings have many advantages:
1. Excellent adhesion
2. Variety diversity and wide adaptability
3. Antirust performance
4. Excellent resistance
5. High security
6. Environmentally friendly


Features
No irritating smell.
It meets the DISC electrostatic spraying process and has good construction adaptability.
After curing, the paint film has excellent abrasion resistance, stacking resistance, neutral salt spray, impact resistance and chemical resistance.
The products meet the standards of toxic and harmful substances in auto parts.


Film Properties:

Test Item	Result
Drying time (25ºC)	Surface dry time: 1h; Ultimate dry time: 24h	Fully cured in 7 days
	Using drier: 80-90ºC×30min
Adhesive (scratch)	Grade 1
Pencil hardness (HB)	H
Impact (50kg•cm)	Pass
Flexibility	1mm
Corrosion resistance	>360h
Water resistance	>300h

 Instructions  

Composition	Component A (black liquid)	Specific gravity 1.33±0.05
	Component B (brown liquid)	Specific gravity 1.01±0.03
Mix proportion	Weight ratio	Component A:B = 6:1
	Volume ratio	Component A:B = 4.5:1
Mass solid content (105ºC×3h)	45±5%
Mix method	After mixing component A, add component B and fully mix evenly
Coating thickness	Dry film thickness	30-50μm
	Wet film thickness	180μm
Diluent	Deionized water, add about 0~10%
Curing period(25ºC)	--
Pot-life(25ºC)	2h
Recoating interval	Minimum 4h Maximum 48h
Pretreatment of substrate	When directly applied to the surface of the substrate, the substrate should be treated with phosphating, vitrification, and silanization, and it must be clean, dry, rust-free, and oil-free.
Substrate temperature	Substrate temperature should be higher than dew point by 3ºC
Construction Conditions	The construction temperature is 10-35ºC, the humidity is 30-75%, and the ventilation conditions are good. For construction in winter, it is recommended to preheat the workpiece and use hot air circulation to increase the surface temperature of the workpiece. Infrared heating can be used.
Process	Substrate - Rust removal, degreasing, dust removal, phosphating, si-lane, vitrification treatment - Moisture drying - Spraying water-based paint - Leveling at room temperature for 5-10 minutes - Gradient heating, 90-100 degrees 30 minute artifact - Off-line packaging
Coating method	DISC electrostatic spraying:	Spraying voltage: 50 ~ 60 kV Spraying pressure: 0.35-0.45Mpa Construction viscosity: 16-20s (25-30ºC)
	Hand spraying:	Construction viscosity: 35-43s (25-30ºC)
Applicable substrate:	Suitable for cast iron, galvanized sheet, carbon steel, cast aluminum and other metal substrates
Clean	Wash tools and equipment with clean water immediately after construction
Storage life	The storage period of the paint is six months, please be sure to use it up within the storage period, so as not to affect the quality; the paint (including curing agent, thinner) should be sealed and stored in a cool place, waterproof, leakproof, sunscreen, high temperature, and away from fire .
Package	Component A: 18kg/barrel          Component B: 3.0kg/barrel

 Precautions     
(1) The surface of the object to be coated must be clean and dry, and the surface treatment of the substrate must meet the requirements.
(2) Part A and curing agent should be formulated strictly according to the volume ratio of 4.5:1 (or weight ratio of 6:1), diluted with 0-10% deionized water, aged for 10 minutes, and used within the applicable period The pot life is 2 hours at 25°C, and the higher the temperature, the shorter the pot life.
(3) The tools used in construction must be kept dry and clean.
(4) It is strictly forbidden to contact with acid, alkali, oily paint, organic solvent, etc. during the process of paint preparation and coating.
(5) The film formation at one time should not be too thick, and the dry film exceeding 60 μm is prone to sagging
(6) During construction and drying and curing, the relative humidity should be ≤75%, and the temperature should be ≥10°C, otherwise the paint film cannot be fully cured and has no performance.
(7) Avoid contact with organic solvents and water before the paint film is completely dry, and do not press or rub heavily to avoid damage to the paint film.
(8) Keep good ventilation at the construction site and wear necessary protective equipment.
(9) In order to achieve sagging resistance, when the ambient temperature is lower than 10°C, it is recommended to preheat the workpiece, and the optimum coating temperature on the surface of the workpiece is greater than 20°C; at the same time, increase the wind speed in the spraying workshop, and introduce hot air circulation in winter , to ensure that the wind speed reaches 0.5m3/s.


 Health and safety    
(1) The paint is a water-based product, and there is no health hazard in normal use.
(2) It must be well ventilated when in use.
(3) Avoid excessive skin contact.




Company Profile:
Kinte Materials Science and Technology Co., Ltd. is subordinate to China Machinery Industry Corporation (a key state-owned enterprise directly managed by SASAC, ranking 284 among the world's top 500 in 2021). It is a national high-tech enterprise under China National Electric Apparatus Research Institute Co., Ltd. (Stock Code: 688128), a listed enterprise on the SSE STAR MARKET. Focusing on the R & D, production, and sales of environmentally friendly coatings (powder coatings, waterborne industrial coatings) and powder coating resins, the company is committed to improving the global market competitiveness of China's environmentally friendly coating industry. Now it has become the leader and promoter in China's technological development of environmentally friendly coatings as well as polyester resins for powder coatings!

We have gained ISO9001 and ISO14000, ISO18001, RoHS, UL certification and QUALICOAT Certificate. Due to the excellent and stable quality, our products always enjoy high reputation at home and oversea, and were sold to more than 30 countries. Our clients include many top air conditioning manufacturers in the world such as GREE, Midea, TICA, TRANE, etc.

We unremittingly stick at the business principle of "Quality is the life, adhere to first-class technology, first-class quality, first-class cost and first-class brand". We would like to provide a complete set of services and solutions for both domestic and abroad customers and would like to go forward to brilliant future with you together.